32 found, showing page 2 of 3
Simpson Strong-Tie LU LU28 Joist Hanger, 6-3/8 in H, 1-1/2 in D, 1-9/16 in W, 2 x 8 in, Steel, Galva
PRODUCT OVERVIEW
The LU is designed for joist-to-header installation in wood-framed construction. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. The economical LU hanger is value-engineered for strength.
Product Details
Depth:1-1/2 in
Fastener Type:Screw
Finish:Galvanized/Zinc
Material:Steel
Mounting Type:Face
Size:2 x 8 in
Width:1-9/16
Features
LU series hangers are tested, load-rated and code compliant
The LU series installs using several fastener selections with tested allowable loads
Precision-formed engineered for installation ease and design value
Made from 20 ga steel
Galvanized (G90) for extra corrosion resistance
View Details
$1.45
Simpson Strong-Tie LUS LUS210-2Z Joist Hanger, 8-15/16 in H, 2 in D, 3-1/8 in W, Steel, ZMAX, Face M
PRODUCT OVERVIEW
The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
Product Details
Depth:2 in
Fastener Type:Nail
Finish:ZMAX
Material:Steel
Mounting Type:Face
Width:3-1/8
Features
Patented double-shear nailing design provides greater strength with fewer nails
Speed prongs for fast and easy installation
Angled joist nailing easier in tight spaces
Do not bend or remove tabs
Made from 18 ga steel
ZMAX(R) galvanization offers extra corrosion resistance for exterior and treated-wood applications
Cannot be modified
Works for a wide range of applications
Features speed prongs used to temporarily position and secure the connector for easier and faster installation
LUS series hangers are tested, load-rated and code compliant
View Details
$6.35
Simpson Strong-Tie LUS LUS24Z Joist Hanger, 3-1/8 in H, 1-3/4 in D, 1-9/16 in W, Steel, ZMAX, Face M
PRODUCT OVERVIEW
The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
Product Details
Depth:1-3/4 in
Fastener Type:Nail
Finish:ZMAX
Material:Steel
Mounting Type:Face
Width:1-9/16
Features
Patented double-shear nailing design provides greater strength with fewer nails
Speed prongs for fast and easy installation
Angled joist nailing easier in tight spaces
Do not bend or remove tabs
Made from 18 ga steel
ZMAX(R) galvanization offers extra corrosion resistance for exterior and treated-wood applications
Cannot be modified
Works for a wide range of applications
Features speed prongs used to temporarily position and secure the connector for easier and faster installation
LUS series hangers are tested, load-rated and code compliant
View Details
$1.39
Simpson Strong-Tie LUS LUS26-2Z Joist Hanger, 4-15/16 in H, 2 in D, 3-1/8 in W, Steel, ZMAX, Face Mo
PRODUCT OVERVIEW
The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
Product Details
Depth:2 in
Fastener Type:Nail
Finish:ZMAX
Material:Steel
Mounting Type:Face
Width:3-1/8
Features
Patented double-shear nailing design provides greater strength with fewer nails
Speed prongs for fast and easy installation
Angled joist nailing easier in tight spaces
Do not bend or remove tabs
Made from 18 ga steel
ZMAX(R) galvanization offers extra corrosion resistance for exterior and treated-wood applications
Cannot be modified
Works for a wide range of applications
Features speed prongs used to temporarily position and secure the connector for easier and faster installation
LUS series hangers are tested, load-rated and code compliant
View Details
$4.25
Simpson Strong-Tie LUS LUS26Z Joist Hanger, 4-3/4 in H, 1-3/4 in D, 1-9/16 in W, Steel, ZMAX, Face M
PRODUCT OVERVIEW
The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
Product Details
Depth:1-3/4 in
Fastener Type:Nail
Finish:ZMAX
Material:Steel
Mounting Type:Face
Width:1-9/16
Features
Patented double-shear nailing design provides greater strength with fewer nails
Speed prongs for fast and easy installation
Angled joist nailing easier in tight spaces
Do not bend or remove tabs
Made from 18 ga steel
ZMAX(R) galvanization offers extra corrosion resistance for exterior and treated-wood applications
Cannot be modified
Works for a wide range of applications
Features speed prongs used to temporarily position and secure the connector for easier and faster installation
LUS series hangers are tested, load-rated and code compliant
View Details
$1.89
Simpson Strong-Tie ML ML24Z Angle, 2 in W, 2 in D, 4 in H, Steel, ZMAX
PRODUCT OVERVIEW
The ML-angle combines strength and versatility through the use of Strong-Drive(R) SDS heavy-duty connector screws. Fastener holes are staggered to minimize wood splitting and opposing hole patterns allow for back-to-back installation without fastener interference.
Product Details
Depth:2 in
Fastener Type:Screw
Finish:ZMAX
Material:Steel
Material Thickness:12 ga
Width:2
Features
Provide a 90 deg connection for medium/heavy-duty applications
Stronger than angled nailing or screw fastening
Help ensure joints are consistently straight and strong
Made from 12 ga steel
ZMAX(R) galvanization offers extra corrosion resistance for exterior and treated-wood applications
View Details
$3.29
Simpson Strong-Tie ML ML26Z Angle, 2 in W, 2 in D, 6 in H, Steel, ZMAX
PRODUCT OVERVIEW
The ML-angle combines strength and versatility through the use of Strong-Drive(R) SDS heavy-duty connector screws. Fastener holes are staggered to minimize wood splitting and opposing hole patterns allow for back-to-back installation without fastener interference.
Product Details
Depth:2 in
Fastener Type:Screw
Finish:ZMAX
Material:Steel
Material Thickness:12 ga
Width:2
Features
Provide a 90 deg connection for medium/heavy-duty applications
Stronger than angled nailing or screw fastening
Help ensure joints are consistently straight and strong
Made from 12 ga steel
ZMAX(R) galvanization offers extra corrosion resistance for exterior and treated-wood applications
View Details
$4.19
Simpson Strong-Tie MP MP24 Mending Plate, 4 in L, 2 in W, 20 ga Gauge, Steel, Galvanized
PRODUCT OVERVIEW
Versatile and easy-to-use mending plates for wood-to-wood connections. No nails or notching of wood required. For non-structural applications only; not for truss applications.
Product Details
Finish:Galvanized
Length:4
Material:Steel
Material Gauge:20 ga
Width:2
Features
These non-structural connectors are ideal for general fix-up work
Installs without nails; align wood with arrows at joint and hammer plate to embed prongs
Galvanized (G90) for extra corrosion resistance
Place plate over two pieces of aligned wood with arrows aligned at joint Place a wood block over the mending plate and hammer the wood block to embed the prongs
View Details
$1.39
Simpson Strong-Tie MP MP36 Mending Plate, 6 in L, 3 in W, 20 ga Gauge, Steel, Galvanized
PRODUCT OVERVIEW
Versatile and easy-to-use mending plates for wood-to-wood connections. No nails or notching of wood required. For non-structural applications only; not for truss applications.
Product Details
Finish:Galvanized
Length:6
Material:Steel
Material Gauge:20 ga
Width:3
Features
These non-structural connectors are ideal for general fix-up work
Installs without nails; align wood with arrows at joint and hammer plate to embed prongs
Galvanized (G90) for extra corrosion resistance
Place plate over two pieces of aligned wood with arrows aligned at joint Place a wood block over the mending plate and hammer the wood block to embed the prongs
View Details
$1.79
Simpson Strong-Tie NS NS2 Nail Stopper, 14 ga Gauge, Steel, Galvanized/Zinc
PRODUCT OVERVIEW
The NS is designed to prevent nails from piercing and damaging mechanical, electrical and plumbing pipes and lines. To protect supply lines, the nail stopper is installed over each point where utilities pass through framing members. The NS meets all building code requirements to provide protection against physical damage to utility lines.
Product Details
Dimensions:6 in L x 1-1/2 in W
Finish:Galvanized/Zinc
Material:Steel
Material Gauge:14 ga
Features
Great for home projects or at the construction site
Made from durable galvanized steel for lasting and reliable use and to resist corrosion
Galvanized (G90) for extra corrosion resistance
View Details
$1.75
Simpson Strong-Tie PGT Series PGT2Z-R Pipe Grip Tie, 6-1/2 in W, 12 ga Thick Material, Steel, ZMAX,
PRODUCT OVERVIEW
The PGT is a tie designed for attaching wood fence rails to metal fence posts. This pipe grip tie can be used in new construction or to replace damaged wooden posts. Ideal for a variety of conditions, the PGT helps to eliminate the rot and failures to which wood fence posts are most prone, thus extending the life of a fence.
Product Details
Fastener Type:Screw
Finish:ZMAX
Includes:(1) 1/4 in Hex Head Bolt
Material:Steel
Material Thickness:12 ga
Width:6-1/2
Features
Install on 2 in (2-3/8 in outside diameter) vertical pipes, offsetting corners to allow for the correct rail alignment
Use 3 to 4 PGTs per pipe; line up to stringline
Field-bend PGT flanges to fit corner and angled conditions (bend one time only)
ZMAX(R) galvanization offers extra corrosion resistance for exterior and treated-wood applications
A solid connection with quick and easy installation
Ideal for replacing damaged wood posts or for new fence construction
Install on vertical pipes, offsetting corners to allow for the correct rail alignment
Use three to four PGTs per pipe; line up to stringline
Tighten PGT with one 1/4 in hex head bolt (supplied)
Attach PGT to rails using four 1/4 x 1-1/2 in Strong-Drive(R) SDS heavy-duty connector screws (not supplied), 1/4 in lag screws may be substituted
View Details
$4.99
Simpson Strong-Tie RTA RTA2Z Rigid Tie Connector, 16 ga Gauge, Steel, ZMAX
PRODUCT OVERVIEW
The RTA is designed to connect two wood members at a 90 deg angle. This rigid tie angle fastens the members on two sides, eliminating the need for angle bracing. Manufactured to high-quality standards to ensure solid performance, this rigid tie connector features a galvanized finish for added corrosion resistance.
Product Details
Fasteners:Post Joist
Finish:ZMAX
Load Rating:150 lb
Material:Steel
Material Gauge:16 ga
Specifications:2 x 2 Post Size 2 x 2 Joist Size
Features
Ideal for gates, fences or any project where a 90 deg connection is needed Fastens with Simpson Strong-Tie(R) Strong-Drive(R) SD screws (not included) Provides a strong 90 deg connection without 45 deg cuts or angled fastening ZMAX(R) galvanization offers extra corrosion resistance for exterior and treated-wood applications
View Details
$3.65
Simpson Strong-Tie RTC Series RTC2Z Rigid Tie Connector, 5-1/2 in H x 5-1/2 in W x 4.13 in D Dimensi
PRODUCT OVERVIEW
The RTC is a uniquely designed rigid tie connector that connects two horizontal members at a corner to a vertical wood member. Manufactured to high-quality standards to ensure solid performance, this corner rigid tie connector features a galvanized finish for added corrosion resistance.
Product Details
Dimensions:5-1/2 in H x 5-1/2 in W x 4.13 in D
Fasteners:Screw
Finish:ZMAX
Material:Steel
Material Gauge:18 ga
Features
No angled cuts or angled fastening that can split the wood
Stronger than other methods of corner construction
Quickly and accurately align framing members
Made from 18 ga steel
ZMAX(R) galvanization offers extra corrosion resistance for exterior and treated-wood applications
Compatible with Simpson Strong-Tie(R) Strong-Drive(R) SD screws
Constructed from corrosion-resistant galvanized steel
Easier and stronger than angled fastening
View Details
$7.75
Simpson Strong-Tie T 66T T-Strap Tie, 14 ga Gauge, Steel, Galvanized/Zinc
PRODUCT OVERVIEW
The T is designed for beam-to-column applications. This versatile utility strap is T-shaped, making it ideal for transferring tension loads in a variety of applications. The T features well-placed fastener holes and can easily be installed with nails or bolts.
Product Details
Dimensions:6 in L x 1-1/2 in W x 5 in H
Finish:Galvanized/Zinc
Material:Steel
Material Gauge:14 ga
Features
Galvanized for corrosion resistance
Reinforcement T-strap for a strong connection where one member intersects another at 90 deg strongest when used in pairs
Versatile for a variety of beam-to-column projects
Galvanized (G90) for extra corrosion resistance
View Details
$4.55
Simpson Strong-Tie TP TP15 Tie Plate, 5 in L, 1-13/16 in W, Steel, Galvanized, Fastening Method: Nai
PRODUCT OVERVIEW
The TP is designed to join and reinforce wood members. This versatile and easy-to-use tie plate is ideal for splicing and for reinforcing all types of wood-to-wood connections. The TP features a nail-on design for quick and easy installation.
Product Details
Fastening Method:Nail Screw
Finish:Galvanized
Length:5
Material:Steel
Material Gauge:20 ga
Width:1-13/16
Features
Ideal for reinforcing wood-to-wood connections on flat members
Staggered nail pattern for a secure connection that resists splitting Galvanized (G90) for extra corrosion resistance
View Details
$1.15
